
2011 Silverado Battery Replacement + Alternator Test
Description
My 2011 Chevy Silverado gave me nothing but a click when I tried to start it. Here's the whole battery replacement start to finish, plus how I used a battery tester to check the new battery and the alternator. ⏱️ TIMESTAMPS 0:00 The problem: dead battery, just clicking 0:24 Remove the bracing 0:34 Disconnect the terminals (10 mm, negative first) 1:00 Remove the hold-down clamp (1/2 inch) 1:16 Pull the old battery out 1:27 Install the new battery and secure the hold-down 1:43 Terminal protectors 2:01 Connect positive first, then negative (snug, don't overtighten) 2:52 Terminal protectant spray 3:11 Start-up test 3:27 Reinstall the bracket (13 mm) 4:12 Testing with a battery tester 5:17 Cranking test 5:48 Charging test (alternator) 5:57 What the "high voltage" warning means 6:15 Disconnect the tester + wrap-up 🔧 TOOLS & PRODUCTS (affiliate links) • Ancel battery tester: https://amzn.to/4hb6x97 • Battery terminal protectors: https://amzn.to/4rknnp6 • Battery terminal protectant spray: https://link.amazon/B0aqBxRt5 • My Favorite Socket set: https://amzn.to/4bBrJSZ • Ratcheting wrenches: https://amzn.to/4rn0ku2 As an Amazon Associate I earn from qualifying purchases. This doesn't cost you anything extra. ⚠️ SAFETY • Disconnect the negative terminal first and reconnect it last. • Snug the terminals so they don't move, but don't overtighten them. • Check your owner's manual or the battery label for the right size, specs, and torque values for your truck. 📝 NOTES • Sizes in this video: 10 mm terminals, 1/2 inch hold-down, 13 mm bracket. • The tester showed a "high voltage" warning during the charging test. My readings were within the 12.6 to 15 volt range I mention in the video, but always check your manufacturer's specs before replacing parts. 📺 RELATED Battery replacement on a Mazda6: https://www.youtube.com/watch?v=DNyFDXV42t0 Subscribe for more DIY repairs and home projects.